How to Upgrade Your MacBook’s SSD: A Complete Guide
MacBook running slow? Learn how to increase capacity, which MacBooks are eligible for an internal SSD upgrade and how to perform the upgrade.
•By Matthew Robinson•8 min read •Share
There are some things that just challenge a person’s patience. Crawling behind a fully loaded truck on the N3 is one of them. Another is a MacBook that takes as long to load as your first ever Windows laptop.
Most times, the cause isn’t a mystery. A near-capacity or failing SSD is inconvenient, disruptive to your workflow and frustrating. But with some MacBook models, it’s an easily solvable problem. All it takes is a bit of DIY work (or a professional service), and your MacBook should start moving again – and at a pace that doesn’t make you grind your teeth.
Need More Storage? Book a MacBook SSD Upgrade Today
6-month warranty on all repairs · Written quote before any work begins · Collection & delivery across Gauteng (R300)
Signs Your MacBook May Need an SSD Upgrade
The most obvious sign of a storage problem is all-around slowness. That can look like long boot times (3+ minutes) or constant spinning beach balls. You may also notice loud fan noise during basic tasks, apps taking 30 seconds or more to load and sluggish saves.
Your MacBook may also talk to you, sending ‘storage almost full warnings’. Or you may try to update macOS only for it to fail due to insufficient space.
All of these symptoms point to an SSD in need of an upgrade or a good decluttering. But before we go any further, let’s answer a simple question you may be wondering about.
What Is an SSD?
A solid state drive, usually just referred to as an SSD, is a data-storage device. Unlike hard disk drives (HDDs), it uses integrated flash memory chips in place of mechanical spinning disks. The SSD harnesses electrical charges to store data, and because there’s no need to wait for physical parts to start moving, they’re much faster than HDDs.
Can You Upgrade the SSD in a MacBook?
It is possible to update the SSD in both a MacBook Air and MacBook Pro, but only if the model is supported.
If you own a 2013–2017 Intel MacBook Air or 2013–2015 Intel MacBook Pro, you should be able to upgrade the internal SSD. If you own an Apple Silicon MacBook (M1, M2, M3, M4 or M5) you won’t be able to. That’s because the storage disk is soldered directly to the board. In other words, it can’t be removed and replaced with another drive.
Here’s how to find out whether your MacBook is supported:
-
Click on the Apple icon in the top-left corner.
-
Go to ‘About This Mac’.
-
This is where you’ll see your model year and identifier. For example, you may see MacBook Pro 13-inch 2020, along with other information, including the serial number.
-
If you’re looking for the exact model number, flip your MacBook over and check the bottom.
Although the internal SSD of an Apple Silicon model can’t be upgraded, there are some storage solutions you can try. For example, you can look into an external SSD, such as a high-speed USB-C or Thunderbolt SSD.
What to Try Before Attempting an SSD Upgrade
The thought of opening up your MacBook to perform an SSD upgrade on your own may be daunting. If you’d rather try something a bit less complicated first, some basic decluttering techniques can make a big difference:
-
Start by looking at what’s eating up your storage. Go to System Settings > General > Storage. You’ll see how much space things like documents, apps and photos are occupying.
-
Transfer large, infrequently used files to an external SSD if you don’t want to lose them. Get rid of what you don’t need anymore. Clear the bin once you’re done deleting files.
-
Also uninstall unused apps, clear temporary app caches and delete outdated iPhone or iPad backups.
The goal is to get your MacBook to 15–20% open storage.
This strategy may be an easier fix than an SSD upgrade if the main problem is that files have just been building up over the years. If your MacBook is more of a workhorse and you really do need an SSD with more storage capacity, then a big digital spring clean isn’t going to do the trick.

Upgrading a MacBook Air or Pro SSD: How to Prepare
If you’d like to try the upgrade, start with preparation.
Step 1: Source a New SSD
Before getting into the kind of SSD, let’s establish how much space to go for. As a rule of thumb, look for an SSD that’s at least 30–40% greater than the data currently on your drive. For daily use, a minimum of 500 GB is recommended, whereas 1–2 TB or more is better if you work with large files.
When it comes to choosing an SSD, you have two options: a generic NVMe SSD with an adapter, or a Mac-specific SSD.
An NVMe SSD with a third-party adapter is the cheapest route. The adapter is necessary because 2013–2017 MacBook Air and Pro models use Apple’s proprietary blade connectors instead of M.2 slots.
However, some adapters don’t work with certain MacBook models, and 2013–2014 models may go into a kernel panic when the MacBook goes to sleep.
The second option – Mac-specific SSDs – don’t require an adapter, but they are more expensive, and there are limited capacity options.
Step 2: Gather Your Tools
Upgrading the internal SSD of a MacBook requires opening up the case, so you’ll need some tools:
-
screwdrivers: T5 Torx (a six-pointed star tip) and P5 Pentalobe (a five-pointed star tip)
-
a spudger for prying components
-
the new SSD
-
a USB or Thunderbolt drive for creating a backup
Step 3: Verify or Update Your macOS
If you’ve decided to go the NVMe route, this step is essential.
Go to System Settings > General > About. This will show you your current macOS. Ideally, the MacBook should be running on the newest officially supported version for your model, but macOS 10.13 High Sierra or later will do.
Older versions of macOS won’t recognise NVMe drives. Completing the upgrade without updating the software just means that you’ll need to reinstall the old SSD and start from scratch.
Step 4: Complete a Time Machine Backup
Back up your existing SSD before performing the upgrade. Time Machine is one method for doing this.
You’ll need the external storage drive mentioned in the list of tools for this. It can be a USB or Thunderbolt drive, ideally one with at least twice the storage capacity of your MacBook.
Apple provides a thorough, step-by-step explanation of how to complete a Time Machine backup.
Upgrading the SSD in a MacBook: Step-by-Step Process
Your tools are ready, your macOS is supported and you have your backup sorted. Time to actually do the installation. Be careful when working with the internal parts, since you don’t want to risk a secondary MacBook Air or MacBook Pro repair.
Before we get started, it’s worth noting that MacBook Pros and MacBook Airs have different lower-case layouts. The steps that follow are a general procedure, not a model-specific breakdown.
Step 1: Opening the MacBook Case
Before anything else, power off your MacBook, disconnect any peripherals, and close the lid.
Flip your MacBook over so that it’s top-side up, then remove the screws using the Pentalobe screwdriver. Some may be longer than others, so try to keep them separate. Make a note of which ones went where, or take a photo before removing all of them.
Next, carefully lift the bottom cover. Then, disconnect the battery connector. You should see a wide, flat rectangular plug along the top of the battery if you own a 2013–2015 MacBook Air or MacBook Pro.
Use the spudger to remove it, prying it straight up. If you don’t have a spudger, use your fingernail. Whatever you do, don’t use anything made of metal.
The point of disconnecting the battery is to ensure that nothing will turn on while you’re busy with the installation of the new SSD.
Step 2: The Installation
Locate the SSD and remove the T5 Torx screw holding it in place, then gently remove the SSD from the slot. Carefully align the new SSD with the slot, sliding it in at a slight angle. Don’t force it in.
Once it’s in position, lightly press down and replace the T5 Torx screw.
Repeat the first few steps in reverse order: reconnect the battery connector, replace the bottom cover and secure the screws in place.
Step 3: Installing macOS
After the SSD is in place, you’ll have to install macOS. Make sure you have a stable Wi-Fi connection. If not, you can also use an Ethernet cable.
Start by pressing the power button, then immediately press and hold Command + Option + R until you see a spinning globe. If you’re using Wi-Fi, connect to the network when the prompt appears. A progress bar below the globe confirms that the connection has been established.
When you see the Utilities screen, select Disk Utility, then follow these steps:
-
Go to View (top-left corner) and Show All Devices if you don’t see the new drive.
-
Click on the new drive. You’ll need to reformat it so that the installer recognises it, so select Erase.
-
Name the drive, then set the format to APFS. Set the Scheme to GUID Partition Map.
-
Click Erase again, then quit Disk Utility once it’s finished.
-
Back in the Utilities menu, select Install macOS. Click Continue and agree to the terms and conditions.
-
Choose your new SSD as the destination, then follow the prompts to complete the reinstallation.
Step 4: Data Restoration and Connection Verification
This is where your Time Machine backup comes in. Using Migration Assistant, you can restore your personal files and apps. Apple provides a detailed breakdown of how to restore data from a Time Machine backup.
Once you’ve completed that, verify the connection and link speed:
-
Go to System Settings > General > About. Scroll down to System Report.
-
Under Hardware, select NVMExpress. If it’s connected, you should see the device there.
-
Go back to System Settings > General, then go to Startup Disk. Check that the new SSD is selected as the boot drive.
-
Run a speed test using Blackmagic Disk Speed Test, which is available for download on the App Store. Run a few test passes to determine the benchmark read and write speeds.
Don’t Want to DIY? iAssist Can Help
Sound too complicated? Just don’t want to risk it yourself? We’ll assist. We provide an SSD upgrade service for compatible MacBook Air (A1465/A1466) and MacBook Pro (A1502/A1398) models. We do all the heavy lifting: SSD installation, macOS reinstallation and data restoration.
If the SSD is corrupted and you haven’t been able to make a backup, we prioritise data recovery before starting the upgrade.
How Much Does a MacBook SSD Recovery Cost?
MacBook repair costs are a natural concern, and the answer is easier to supply for eligible MacBook Air models than for MacBook Pros. You have two options:
-
Option 1: We supply a new, compatible 500 GB blade, complete the upgrade and do the data migration for a cost of R3,800.
-
Option 2: You supply a compatible SSD, and we perform the upgrade and migration for a cost of R1,800.
For MacBook Pros, we provide a written quote following an assessment.
If you’re still not sure whether your MacBook is eligible for an internal SSD upgrade or have a question, get in touch over WhatsApp.
Written by
Founder & Lead Technician at iAssist Repair. Repairing devices since 2003 with 10,000+ repairs. Former Senior Technician at iStore Eastgate, 4× Apple Certified Support Professional and Microsoft Certified Systems Engineer.